*************************************
*   Project name:   P51U            *
*   EC Owner    :   Rover Wen       *
*   BIOS Owner  :   James Lai       *
*************************************
+-----------------------------------+
|   Version :   0.10.13             |
|   Date    :   2019/08/08          |
|   Base on :   0.10.12             |
+-----------------------------------+
1. Enable _CPU_TEMP_THROTTLING function
2. When system warmboot , Pull high TP_RST 500ms
3. When Prochot active,keep 5sec
+-----------------------------------+
|   Version :   0.10.12             |
|   Date    :   2019/07/30          |
|   Base on :   0.10.11             |
+-----------------------------------+
1. Fixed CNVi card can not wake up on S4 
+-----------------------------------+
|   Version :   0.10.11             |
|   Date    :   2019/07/24          |
|   Base on :   0.10.10             |
+-----------------------------------+
1. When system is S3 <=> S0 , added TP_RST Low/High 10ms
+-----------------------------------+
|   Version :   0.10.10             |
|   Date    :   2019/04/17          |
|   Base on :   0.10.09             |
+-----------------------------------+
1. Modify SUS_ACK power pin for EuP function
  ( active Reverse )
2. Added detect EuP function in system S5
+-----------------------------------+
|   Version :   0.10.09             |
|   Date    :   2019/03/26          |
|   Base on :   0.10.08             |
+-----------------------------------+
1. Modify SUS_ACK power pin for EuP function
+-----------------------------------+
|   Version :   0.10.08             |
|   Date    :   2019/03/14          |
|   Base on :   0.10.07             |
+-----------------------------------+
1. Disable when system us S3 , Power LED flash
2. Fixed S5 power current loss issue
+-----------------------------------+
|   Version :   0.10.07             |
|   Date    :   2019/03/14          |
|   Base on :   0.10.06             |
+-----------------------------------+
1. Turn off  serial port for power saving 
   ( Pull-down ==> Low)
2. Fixed battery information can not update 
+-----------------------------------+
|   Version :   0.10.06             |
|   Date    :   2019/03/12          |
|   Base on :   0.10.05             |
+-----------------------------------+
1. Turn off  serial port for power saving 
+-----------------------------------+
|   Version :   0.10.05             |
|   Date    :   2019/03/04          |
|   Base on :   0.10.04             |
+-----------------------------------+
1. Added power loss function
2. added EuP function
+-----------------------------------+
|   Version :   0.10.04             |
|   Date    :   2019/02/19          |
|   Base on :   0.10.03             |
+-----------------------------------+
1. Added BRAM function ( ECRAM 0x2280 ~ 0x228D)
+-----------------------------------+
|   Version :   0.10.03             |
|   Date    :   2019/02/13          |
|   Base on :   0.10.02             |
+-----------------------------------+
1. Fixed when RTC battery loss or press clean CMOS,
   system auto power on issue.

+-----------------------------------+
|   Version :   0.10.02             |
|   Date    :   2019/01/18          |
|   Base on :   0.10.01             |
+-----------------------------------+
1. Modify Battery detect function
2. Modify SMBUS ON / OFF function
3. Modify Wlan power enable sequence for power lose
4. Fixed Battery can not booting
 
+-----------------------------------+
|   Version :   0.10.01             |
|   Date    :   2019/01/10          |
|   Base on :   0.10.00             |
+-----------------------------------+
1. Modify Power sequence
2. Modify Battery detect function
+-----------------------------------+
|   Version :   0.10.00             |
|   Date    :   2018/12/28          |
|   Base on :   0.00.05             |
+-----------------------------------+
1. Modify safety protect function
2. Added TX/RX function
3. Fixed issue
4. Release for B phase
+-----------------------------------+
|   Version :   0.00.05             |
|   Date    :   2018/12/06          |
|   Base on :   0.00.04             |
+-----------------------------------+
1. Enable Protect_Process function
2. Fixed APC protect issue
3. Fixed Adapter current 
+-----------------------------------+
|   Version :   0.00.04             |
|   Date    :   2018/11/29          |
|   Base on :   0.00.03             |
+-----------------------------------+
1. Modify wake on Lan power control by BIOS memu
2. Added watch dog function for AP tools
+-----------------------------------+
|   Version :   0.00.03             |
|   Date    :   2018/11/21          |
|   Base on :   0.00.02             |
+-----------------------------------+
1. Modify Lan power always on
2. Fixed S3 can not wake up issue
3. Fixed System can not charge on S5
4. Modify charge current change from 1.3A to 1A
5. Modify when system is S5 , cut off USB power
6. Modify Wlan power always on for CNVi
+-----------------------------------+
|   Version :   0.00.02             |
|   Date    :   2018/11/19          |
|   Base on :   0.00.01             |
+-----------------------------------+
1. To slove SCI# can not send issue
2. Modify Battery detect voltage
3. Modify Power on sequence
+-----------------------------------+
|   Version :   0.00.01             |
|   Date    :   2018/11/12          |
|   Base on :   0.00.00             |
+-----------------------------------+
1. New added G3 to S5 sequence
2. Added debug function for USB debug card
3. Modify pin define and GPIO table
4. Modify ADC function
5. Added 6064 command D9 for SSD_SATA_SEL#
6. Added when adapter under 10V , to do something
+-----------------------------------+
|   Version :   0.00.00             |
|   Date    :   2018/10/24          |
|   Base on :   NN5KG03             |
+-----------------------------------+
1. First release for SMT.                

