

        **************************
        *                        *
        *  Install LAN Software  *
        *                        *
        **************************

=========================
Install WIN98 LAN driver
=========================

The LAN Device Driver can't install automatically, you need double click on My Computer -> Control Pnael -> System icon to bring up System Properties screen.  

Select tab "Device Manager".
You will find a yellow "?" mark at PCI Ethernet Controller, that means the driver is not recognize.
Double click on the Ethernet Controller.

Then PCI Ethernet Controller Properties windows will appear on your screen. 
Click on the "Reinstall Driver" bar to install driver.

The Updade Device Driver Wizard windows will appear on your screen. 
Click on "Next" bar to continue.

Please choose "Display a list of the drivers  in a specific location, so you can select the driver you want" to the manual install driver, and click on "Next" bar to continue.

Select "Network adapters" bar  for LAN device and click on "Next" bar to continue.

Insert the support CD by the mainboard manufacturer and choose "Have Disk" bar to continue next step.

Indicate the driver's location as
"D:\lan\WIN98\NETRTS5.INF" (In this location CD disk drive is supposed to be "D" letter.)

Select "Realtek RTL8139 [A/B/C/8130] PCI Fast Ethernet NIC" to install, and then click on "OK".

Make sure "Realtek RTL8139 [A/B/C/8130] PCI Fast Ethernet NIC" driver, and click on "Next".
Then the system will do the setup procddure  automatically.

Completing the upgrade device driver,
and click on "Finish" to restart the system to take all the changes effect.

After restart, you may check Network adapters under the location mentioned at right figure. 
The Network adapters shows correctly. 


=========================
Install WINNT LAN driver
=========================

The LAN Device Driver can't install automatically, you need double click on My Computer -> Control Pnael -> Network icon to bring up Network screen.  

Select tab "Adapters" and "Add" bar to install driver.

Insert the support CD by the mainboard manufacturer and choose "Have Disk" bar to continue next step.

Key in the driver's location as
"D:\lan\WINNT4\" (In this location CD disk drive is supposed to be "D" letter.) and click on "OK".

Select "Realtek RTL8139 [A/B/C/8130] PCI Fast Ethernet Adapter" to install then click on "OK".

Chocse the proper Duplex Mode, and click on "OK".

Make sure "Realtek RTL8139 [A/B/C/8130] PCI Fast Ethernet Adapter" driver, and click on "Close".

Setting yourself network.
Then the system will do the setup procddure  automatically.

Completing the upgrade device driver,
and click on "Yes" to restart the system to take all the changes effect.

After restart, you may check Network adapters under the location mentioned at right figure. The Network adapters shows correctly. 

